Crankshaft Production Line for mass production of a V-6, 3.5 L Crankshaft. The production line is engineered to produce 1500 crankshafts per day in (2) 10/hour shifts. The line is able to machine from casting to finish grind. It is CNC controlled and integrated to low profile, automation. The line has been maintained to the highest standards on a strict schedule. The line is supported with hard and perishable tooling, spare parts from stock and complete engineering documentation. We encourage your inspection of the line in our facility.

More Info.	Operation	Description	Equipment	Capacity
	20	CNC, Mill, Center, Ream, Mill Pod	Ingersoll CM	16" X 39"
	30	CNC, Broach Main Diameter	Ingersoll CM	16" X 27"
		CNC, Broach Main Diameter	Ingersoll CM	16" X 27"
	40	CNC, Broach Main Diameter (Finish)	Ingersoll CM	16" X 27"
		CNC, Broach Main Diameter (Finish)	Ingersoll CM	16" X 27"
	50	CNC, Rough Mill Pin Diameter (Finish)	GFM	16" X 39"
		CNC, Rough Mill Pin Diameter (Finish)	GFM	16" X 39"
	60	CNC, Semi Finish Grind Bearing, Post	Landis 5RE-IW	16" X 36"
		CNC, Semi Finish Grind Bearing, Post	Landis 5RE-IW	16" X 36"
	70	CNC, Semi Finish Mill Pins, Undercuts, Sidewall	GFM	16" X 39"
		CNC, Semi Finish Mill Pins, Undercuts, Sidewall	GFM	16" X 39"
	80	CNC Broach Spacing	Ingersoll CM	16" X 27"
	90	Deep Fillet Roll Undercut, Pin & Main Automation	Ingersoll CM	16" X 27"
	130	CNC Finish Grind Mains	Landis 5RE-IW	16" X 36"
		CNC Finish Grind Mains Post/Flange	Landis 5RE-IW	16" X 36"
	140	CNC Finish Grind Pin	Landis 5RE	16" X 32"
		CNC Finish Grind Pin	Landis 5RE	16" X 32"
		CNC Finish Grind Pin	Landis 5RE	16" X 32"
		CNC Finish Grind Pin	Landis 5RE	16" X 32"

Should you need additional information, please feel free to contact Joe Gibbs at joeg@gibbsmachinery.com at your earliest convenience.