GLEASON 104 - Straight Bevel Gear Generator

Specifications Print Specs
Model: 104
Year: 2000
Stock #: 25205
Highlights:
  • "Coniflex"
  • Helical Motion
  • (2) Digital Read Outs
  • CE Mark
  • Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
  • Self-Contained Hydraulic System
  • Coolant Tank & Pump
  • Workhead Brake
  • Chip Conveyor
  • Full Guards Cover
  • Full Compliment of Electrics (Motor/Controls)
Machine Specifications
Year
2000
Control Manufacturer
Conventional
Maximum Cone Distance
114mm
Diametral Pitch
3.0
Maximum Face Width
35mm
Maximum Workpiece Diameter
249mm
Type
Straight Bevel Coniflex Generator
Conventional
4.5
3.0
1.375
9.82
Straight Bevel Coniflex Generator
Manufacturer
GLEASON

    Specifications:

  • Lower Cutter Spindle: OD: .0001 Face: .0001
  • Upper Cutter Spindle: OD: .0002 Face: .0001
  • Work Spindle: Face: .0001 Bore: .0002
  • Cone Distance: 0 to 4-1/2"
  • Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
  • Extreme Ratio: 10-to-1
  • Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
  • Pitch Diameter: 1-to-1 ratio; 6" (max)
  • Diametral Pitch (coarsest): 3 DP
  • Diametral Pitch (finest): 20 DP
  • Face Width: 1-3/8" (max)
  • Index Range: 9 to 93 inclusive, and most numbers up to 175
  • Pressure Angles: 20, 22-1/2 & 25 deg.
  • Diameter of Taper Hole at Large : 3-29/32"
  • Taper per Foot: 39/64"
  • Depth of Taper: 6"
  • Diameter of Hole Through: 2-7/16"
  • Spindle Nose to Machine Center: 1-1/2" to 9"
  • Cutter Speeds: 98 to 286 (feet per minute)
  • Feeds: 4.2 to 69.2 (seconds per tooth)
  • Main Motor: 5 HP - 480V - 1800 RPM - 60 Hz - 3 PH

Print Specs

Browse by Type