SANDBORN PATRIOT - Miscellaneous Equipment

Machine Specifications :

MODEL PATRIOT SANDBORN WATERLINK COOLANT SYSTEM

EQUIPPED WITH:

• EXTREMELY HIGH QUAILITY PURIFICATION
• Removes metallic fines and other solids down to one micron.
• Separates tramp fluids down to one quarter of one percent (.0025).
• Reduces coolant waste by removing the entrained coolant in the tramp
• oil and rag layer.
• VERSATILE PLANTWIDE APPLICATION
• Single system can serve single or multiple formulations; single or multiple
• locations; and different fluids.
• Processes any make or type of coolant or oil.
• A 500 gallon process tank provides inflow to the recovery system.
• A stainless steel basket strainer provides preseparation of course solids.
• A progressive cavity pump provides a homogenous and constant feed flow to the
• system achieving maximum centrifuge effiency. Hydraulic agitation in the dirty
• tank keeps tramp oil and solids suspended for further treatment.
• An intermediate stage solids separation is accomplished using a hydrocyclone
• for coolant. This process limits particle size to less than 30 microns.
• A thermostatically controlled low-watt density heater provides:
• Improved separations of solids and tramp oil.
• Improved cleanliness inside the centrifuge thus reducing maintenance.
• Removal of any dissolved gases such as H2S
• Reduced disposal of recoverable coolant entrained in the rag layer,
• (coolant/tramp oils interface)
• Pasterizes the fluid reducing the need for biocides and fungicides.
• A heat exchanger in the system allows for heat transfer from the discharging
• clean fluid to incoming dirty fluid, minimizing energy usage and lowering the
• fluid temperature to reduce biological regrowth and to keep the sump
• temperature from increasing.
• A high speed disc centrifuge accomplishes a highly efficient
• liquid/liquid/solid separation. Lighter phase oils are separated from heavier
• phase water without degrading coolant emulsions. Solids are automatically
• ejected at preset intervals and the centrifuge is flushed with water heated by
• the IFR, eliminating the need for regular bowl cleaning.
• Recovered liquid is discharged to the clean tank for reuse as new oil or
• coolant. Tramp fluids are automatically discharged as disired. Automatic
• coolant makeup using a proportioner and, if required, deionized water brings
• the recovered fluid to like new standards.
• Controls: System control automatically sequences and monitors process flow and
• temperature, allowing unattened operation.
• SPECIFICATIONS:
• Typical Specifications for S1700 Patriot
• Dimensions: Length: 8.5'
• Width: 8.4'
• Height: 8.0'
• Weight: 2500 lbs.
• Fluid Input: Coolant: 3000 GPD
• Oil: 4000 GPD
• Utility Requirements:
• Electrical: 460 VAC 3 PH, 60 HZ, 30 AZP
• Water: City water for purging - 1 liter
• Deionized water for make-up, 2-10 GPM (if required)
• Control and Indicating Panel: NEMA 12 Enclosure. Solid state
• programable control including: audible/visible alarms, automatic/manual mode
• selector.
• F.O.B., Warren Mich