Machine Specifications :

The No. 116 Hypoid Generator is a completely automatic, high speed machine for cutting spiral bevel, Zero bevel and hypoid gears. The machine is outstanding for its range of work-capable of roughing and finishing both gears and pinions. It handles diame ters up to 18 inches, and gears of 2 diametral pitch and finer. This new generator offers many advantages: improved quality of product, increased production rates, longer cutter life, easier setup and operation, simplified development of tooth bearing and the use of the Unitool method.

Specifications:

• Maximum Pitch Diameter: 18"
• Maximum Rate: 10/1
• Maximum Cone Distance: 9"
• Work Head Angle: 5 degrees - 84 degrees
• Diametral Pitch, Coarsest: 2
• Face Width, Maximum: 2-3/4"
• Number of Teeth: 5-175
• Spindle:
• Diameter Of Taper Hole, Large End: 3-29/32"
• Taper Per Foot: 39/64"
• Depth Of Taper: 6"
• Diameter Of Hole Thru: 3-1/16"
• Spindle Nose To Centerline: 5-1/2"
• Speeds and Feeds:
• Cutter Speeds, Feet Per Minute: 20-115 RPM
• Feeds, Seconds Per Tooth: 9-80 Seconds
• Electrical Equipment:
• Feed Motor: 5 HP, 1800 RPM
• Hydraulic Pump Motor: 3/4 HP, 1800 RPM
• Coolant Motor: 1/2 HP, 3600 RPM
• Floor Space: 75" x 114"
• Net Weight: 23,400 lbs
• Shipping Weight, Boxed for Export:
• 1 Case - 10'6" x 8'9" x 6'5": 26,100 lbs