GLEASON PHOENIX 1000 HC - Spiral Bevel Gear Generator

Specifications Print Specs
Model: 1000 HC
Year: 2000
Stock #: 24950
Highlights:
  • Fanuc 150MB
  • UMC Software
  • Dry Cutting
  • Wet Cutting
  • High Speed Spindle
  • Chamfer Unit
  • Coolant System
  • Chip Conveyor
  • Dry Shrouds
  • Change Gears
  • Auto Load
  • ABB Robot
  • Gage Station
Machine Specifications
Year
2000
Control Manufacturer
Fanuc
Extreme Ratio
10:1
Maximum Face Width
6"
Maximum Diameter Gear
39.4"
Manufacturer
GLEASON PHOENIX

Gleason took the initiative to become the leading expert on axle noise, vibration, and harshness, testing vehicles to understand axle noise and what their machines could do about it. The result is the combined innovation of UMC Ultima™ for quieter gears and PowerDryCut™ for lower costs. UMCUltima™ makes use of CNC to program a change in gear tooth geometry, resulting in the fabrication of much quieter gears. Combined, these innovations produce a hypoidal gear cutting system that requires less investment, less manufacturing space, and produces quieter axle gear sets at a lower cost.

    Specifications:

  • Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1
  • Full Depth:Max: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm)
  • Face Width:Max: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm)
  • Range of Tooth Numbers: 1-300 Inclusive
  • Gear Pitch Diameter, Maximum: 1000 mm (39.37")
  • Cutter Size, Maximum: 18" (diameter) Face Milling
  • Cutter Size, Maximum: 350 mm (radis) Face Hobbing
  • Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg.
  • Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed)
  • A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM
  • B-Swinging Base: 0 to 30 deg./sec, N/A
  • C-Cutter: 0 to 500 deg., Same
  • X-Horizontal: +/-305mm (+/-12")
  • Y-Vertical: +/-305 mm (+/-12")
  • Z-Sliding Base: -25/+700mm (-1/+28")
  • B-Root Angle: -5 Degree/+90 Degree
  • Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper)
  • Taper Per Foot:3/4", Same
  • Depth of Taper Front:6", 152.40 mm
  • Depth of Bore: 678 mm (26.7")
  • Diameter of Taper Bore: 140 mm (5.5")
  • Diameter Through Spindle of Hole:7.125", 180.98 mm
  • MACHINE DIMENSIONS:
  • Length x Width:233"x 209", 5920 mm x 5310 mm
  • Height: 129", 3280 mm
  • Weight: 65,000 lbs., 29,484 kg

Print Specs

Browse by Type