GLEASON 37” Planer - Straight Bevel Gear Generator

Machine Specifications :

37" GLEASON STRAIGHT BEVEL GEAR PLANER

Specifications:

• Capacity:
• Longest Cone Distance: 26"
• Shortest Inside Cone Distance: 2"
• Largest Pitch Angle, Angular Gear: 90 Degrees
• Largest Pitch Angle, Shafts at 90 Degrees: 82 Deg. 53'
• Smallest Pitch Angle, Shafts at 90 Degrees: 7 Deg. 7'
• Extreme Ratio, Shafts at 90 Degrees: 8:1
• Largest Pitch Diameter: 48" (8:1 Ratio)
• Largest Pitch Diameter: 46" (2:1 Ratio)
• Largest Pitch Diameter: 27" (1:1 Ratio)
• Minimum Number of 14-1/2 Degree Inv. Teeth (1:1): 14
• Minimum Number of 20 Degree Inv. Teeth (1:1): 16
• Largest Pitch: 1 DP
• Longest Face: 10"
• Work Spindle:
• Diameter Taper Hole Large End: 2.937"
• Taper Per Foot: 7/8"
• Depth of Taper: 6-3/8"
• Diameter of Hole Through Spindle: 1.688"
• Spindle Nose to Centerline: 4-1/2 - 30-1/2"
• Speeds and Feeds:
• (2) Mechanical Speed Changes w/change gears giving 12 speeds ranging from 15 to 116
• strokes per minute
• (4) Mechanical Feed Changes with change gears giving a range of 24 feeds
• Drive:
• Diameter of Drive Pulley on Machine: 16"
• Speed of Drive Pulley, RPM: 500
• Width of Drive Belt: 4"
• Diameter of Tight and Loose Pulleys on Countershaft: 11-1/2"
• Speed of Countershaft, RPM: 400
• Horsepower of Motor if Required: 7-1/2"
• Miscellaneous:
• Floor Space: 113" L x 82" W
• Net Weight, Lbs: 11,000
• Domestic Shipment, Lbs.: 13,220
• Foreign Shipment - 2 Boxes:
• 106" x 80" x 70"; 344 cu. ft., 12,500#
• 46" x 33" x 32"; 28 cu. ft., 1,260#