GLEASON 104 - Straight Bevel Gear Generator

Machine Specifications :

Specifications:

• Lower Cutter Spindle: OD: .0001 Face: .0001
• Upper Cutter Spindle: OD: .0002 Face: .0001
• Work Spindle: Face: .0001 Bore: .0002
• Cone Distance: 0 to 4-1/2"
• Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
• Extreme Ratio: 10-to-1
• Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
• Pitch Diameter: 1-to-1 ratio; 6" (max)
• Diametral Pitch (coarsest): 3 DP
• Diametral Pitch (finest): 20 DP
• Face Width: 1-3/8" (max)
• Index Range: 9 to 93 inclusive, and most numbers up to 175
• Pressure Angles: 20, 22-1/2 & 25 deg.
• Diameter of Taper Hole at Large : 3-29/32"
• Taper per Foot: 39/64"
• Depth of Taper: 6"
• Diameter of Hole Through: 2-7/16"
• Spindle Nose to Machine Center: 1-1/2" to 9"
• Cutter Speeds: 98 to 286 (feet per minute)
• Feeds: 4.2 to 69.2 (seconds per tooth)
• Main Motor: 5 HP - 480V - 1800 RPM - 60 Hz - 3 PH