GLEASON 104 - Straight Bevel Gear Generator

Specifications Print Specs
Model: 104
Year: 1964
Stock #: 25207
Highlights:
  • "Coniflex"
  • (1) Set-Up of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
  • Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
  • Self-Contained Hydraulic System
  • Self-Contained Coolant System
  • Workhead Brake
  • Full Guards Cover
  • Full Compliment of Electrics (Motor/Controls)
  • Chip Basket
  • Work Light
  • Draw Bar
  • Cutter Heads
  • 480/3/60
  • Splash Guards
  • Cutters Available***
Machine Specifications
Year
1964
Control Manufacturer
Conventional
Extreme Ratio
101.0
Maximum Cone Distance
4.5"
Diametral Pitch
3.0
Maximum Face Width
1.375"
Maximum Workpiece Diameter
9.82"
Type
Straight Bevel Coniflex Generator
Manufacturer
GLEASON

    Specifications:

  • Cone Distance: 0 to 4-1/2"
  • Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
  • Extreme Ratio: 10-to-1
  • Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
  • Pitch Diameter: 1-to-1 ratio; 6" (max)
  • Diametral Pitch (coarsest): 3 DP
  • Diametral Pitch (finest): 20 DP
  • Face Width: 1-3/8" (max)
  • Index Range: 9 to 93 inclusive, and most numbers up to 175
  • Pressure Angles: 20, 22-1/2 & 25 deg.
  • Diameter of Taper Hole at Large : 3-29/32"
  • Taper per Foot: 39/64"
  • Depth of Taper: 6"
  • Diameter of Hole Through: 2-7/16"
  • Spindle Nose to Machine Center: 1-1/2" to 9"
  • Cutter Speeds: 98 to 286 (feet per minute)
  • Feeds: 4.2 to 69.2 (seconds per tooth)
  • Main Motor: 5 HP - 480V - 1800 RPM - 60 Hz - 3 PH
  • Ask for our list of coniflex cutters & hubs***

Print Specs

Browse by Type