GLEASON PHOENIX 400GH - Gear Hobber

Machine Specifications :

Specifications:

• Max. Workpiece Diameter:
• w/Carousel Loader: 15.75"
• Manual Load/Unload: 17.72"
• Max. Diametral Pitch (Coarsest):
• Standard Hob Head (100-1000 RPM): 2 NDP (12 Module)
• Optional Hob Head (150-1500 RPM): 2.5 NDP (10 Module)
• Max. Hob Spindle Torque: 2500 in.lb.
• Max. Hob Setting Angle: +/- 45 Degrees
• Total Swivel Motion: -165 Degrees/+45 Degrees = 210 Degrees
• Minimum Number of Teeth: 2
• Center Distance from Hob Spindle to Workspindle Min./Max.: 1.38"/12.20"
• Height - Workspindle to Center of Hob Spindle Min./Max.: 2.95"/23.62"
• Max. Axial Hob Slide Travel: 20.67"
• Max. Radial Slide Travel: 10.83"
• Distance Between Workspindle and Tailstock Face Min./Max.: 13.78"/38.47"
• Workspindle Mounting Diameter with Adaption: 14.96"
• Workspindle Dimensions:
• Depth of Hole: 5.98"
• Bolt Circle Diameter: 5.91" & 7.48"
• Size of Tapped Holes: M 10 x 1.5 x 20 mm Deep
• Max. Hob Diameter: 6.3"
• Max. Hob Length: 9.5"
• Min. Hob Shift (Tangential Slide Travel): 8.66"
• Hob Spindle Taper: ISO 40 x ISO 40
• Hob Speed Range: 100-1000 RPM (150-1500 RPM with Option)
• Workspindle Speed: 1-75 RPM (5-150 RPM Optional)
• Max. Rapid Traverse Rate:
• Axial: 197 in/min
• Radial: 197 in/min
• Hob Drive Motor: 20.1 HP
• Hydraulic Pump Motor: 5 HP
• Hydraulic Pump Capacity: 10 GPM
• Height (without Mist Collector): 117"
• Height (with Mist Collector): 129.5"
• Floor Space (width x length):
• Manual Load / Unload: 79" x 144"
• With Carousel Loader: 79" x 133"
• Net Weight (Approximate): 26,000 lbs.