LANDIS 3SE - Cylindrical Grinder

Specifications Print Specs
Model: 3SE
Year: 1989
Stock #: 18346
Highlights:
  • Fanuc Control Installed 2007
  • 2-Axis Template Tru-form Servo Step Profile
  • 30 Degree
  • 30" Wheel
  • Dead Headstock
  • Table Traverse
  • Marposs E39
  • Marposs Table Gauge
  • Lateral Locator
  • 3-Gauge
  • TIR Gauge
  • Steady Rests
  • Wheel Balance
  • Servo Motor-Traverse Stepping Motor
  • Mist Collector
Machine Specifications
Year
1989
Manufacturer
LANDIS
Swing
14.0"
Center Distance
60.0"
Wheel RPM
1,200 RPM
Gauging (Yes/No)
Yes

LANDIS 3SE 14\" x 60\" ANGLEHEAD CNC GRINDER REBUILT BY LANDIS & TOOLED 2002 NEW FANUC CONTROL INSTALLED 2007

    EQUIPPED WITH:

  • Fanuc Control Insalled 2007
  • 2-Axis Template Truform Servo Step Profile
  • 30 Degree
  • 30" Wheel
  • Dead Headstock
  • Table Traverse
  • Marposs E39
  • Marposs Table Gauge
  • Lateral Locator
  • 3-Gauge
  • TIR Gauge
  • Steady Rests
  • Wheel Balance
  • Servo Motor-Traverse Stepping Motor
  • Mist Collector
  • SPECIFICATIONS:
  • Swing: 14"
  • Center Distance: 60"
  • Motor: 1200 rpm
  • Motor Pulley Diameter: 7.031"
  • Spindle Pulley Diameter: 6.5"
  • New Wheel Diameter: 30"
  • Worn Wheel Diameter: 22"
  • Max. Wheel: 8500 sfpm
  • Max. Workhead: 333rpm
  • X-Axis Ball Screw Pitch: 5mm per rev.
  • X-Axis Total Stroke: 14.74"
  • X-Axis Motor Pully Wheel Feed Diameter: 3"
  • X-Axis Ball Screw Pulley Diameter: 3"
  • Z-Axis Ball Screw Pitch: 10mm per rev.
  • Z-Axis Total Stroke: 72.88"
  • Z-Axis Motor Pulley Diameter: 3"
  • Z-Axis Ball Screw Pulley Diameter: 6"
  • Total Stroke: +/-2mm
  • Total Marposs Voltage Output: =/-10vdc
  • Dresser One Revolution of the Stepping Motor: .045"
  • Diamond One Revolution of the Stepping Motor: .005"


The LANDIS 3SE is an exclusive part of our Cylindrical Grinders inventory.
Print Specs

Browse by Type