QULACY FILTER QSVB20WN3C - Miscellaneous Equipment

Machine Specifications :

MODEL QSVB20WN3C QULACY FILTER SYSTEM

STANDARD EQUIPMENT:

• 20 HP Motor, Pump & Filter Modulationg Inlet Valve
• 800 Gal Tanks (1 300 & 1 500) Magnetic Motor Starter
• Positive Lubrication Fluid Pump Spin on Fluid Filter
• Standard NEMA Motor, 3-Phase, 60hz, 230/460-volt Air-Cooled or Water-Cooled
• Temperature Regulating Valve Fluid Level Sight Glass
• Fluid Filter Pressure Indicator Synthetic Fluid
• ACCESSORIES:
• Inlet Filters (Std. QSVI 25, 40, 50) Vaccuum Gauges
• Vaccuum Ball Valves Vaccuum Check Valves
• Exhaust Demisters
• PROTECTION DEVICES:
• Pressure Relief Valve
• High Discharge Temperature Shutdown System w/Manual Reset
• APPLICATIONS:
• Medical/Dental Printing & Paper Rubber & Plastics
• Material Handling Food Processing Meat Packing
• Electronics R & D Systems Grinding multi units.
• THE SECTION OF A LARGE PLANT WAS CLOSED BECAUSE OF AN ENGINEERING CHANGE IN
• THE PRODUCT- THE PLANT MANAGER CLAIMED THE COOLANT SYSTEM SAVED THEM ABOUT
• 100,000.00 DOLLARS A YEAR, IT SHOULD LAST ANOTHER 30 YEARS.
• SPECIFICATIONS:
• Drive Motor ............................. 20 HP
• Drive System Belt ....................... Belt
• Inlet Capacity .......................... 319 ACFM
• Max. Operating Pressure (Continuous) .... 10" HgV (506 torr)
• Min. Operating Pressure (Continuous) .... 29.9" HgV (.5 torr)
• Base Pressure ........................... 29.9" HgV (.5 torr)
• Maximum Ambient Temperature ............. 110 Degrees F
• Minimum Ambient Temperature ............. 32 Degrees F
• Inlet Connection ........................ 3" NPT
• Discharge Connection .................... 2" NPT
• Rotor Diameter .......................... 127.5mm
• Rotor Length ............................ 217mm
• Rotor Speed - Male ...................... 5,800 RPM
• Rotor Speed - Female .................... 3,867 RPM
• Tip Speed ............................... 38.7 meters/sec.
• Maximum Safe Speed ...................... 7,500 RPM
• Intake Male Bearings .................... Cylindrical Roller Bearings (x1)
• Discharge Male Bearings ................. Tapered Roller Bearings (x2)
• Intake Female Bearings .................. Cylindrical Roller Bearings (x1)
• Discharge Female Bearings ............... Tapered Roller Bearings (x2)
• Displacement at Operating Speed ......... 350 CFM
• Volumeteric Efficiency .................. 91.1%
• ELECTRICAL DATA:
• Full Load Package BHP (Air Cooled) ...... 19.8 BHP
• Package Electrical Consumption-Air ...... 16.7 KW
• Full Load Package BHP (Water Cooled) .... 19.0 BHP
• Package Electrical Consumption - Water .. 16.0 KW
• Drive Motor Service Factor .............. 1.15
• Drive Motor Speed (Nominal) ............. 3,600 RPM
• Specific Power Air Cooled ............... 6.2 BHP/100
• Specific Power Water Cooled ............. 6.0 BHP/100
• Typical Standard Motor Efficiency ....... 88.5%
• Typical High Efficiency Motor ........... 89.5%
• Typical Premium Efficiency Motor ........ 92.4%
• LUBRICATION:
• Method of Lubrication ................... Pump
• AIR COOLED DATA:
• Max. Heat Rejection ..................... 546 BTU/min.
• Cooling Fan Static Pressure ............. 0.3" wc
• Fan RPM ................................. 3,600
• Fan Flow ................................ 2,240 CFM
• WATER COOLED DATA:
• Water Flow - 50 Degree F ................ 2.8 gal/min
• Water Flow - 70 Degree F ................ 3.3 gal/min
• Water Flow - 90 Degree F ................ 4.0 gal/min
• Maximum Water Delta T @ 50 Degree F ..... 23.3 Degrees F
• Recommended Water Pressure .............. 100 psig
• Typical Water Cooler Pressure Drop ...... 7 psi
• Water Connections ....................... 1/2" NPT
• MAXIMUM DIMENSIONS:
• Length .................................. 65"
• Width ................................... 34"
• Height .................................. 46"
• Weight .................................. 980 Lbs.
• F.O.B. Truck, Location